Kandar B3 - Trigger Guard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A friend asked me for help with the renovation of an air rifle - fortunately, most of it was still intact.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 95
- Makes
- 1
- Views
- 302
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As I mentioned earlier, my friend fortunately had most of the original trigger guard intact, so I was able to measure the important parts. The lower part of the trigger guard on my model is a bit looser, but it doesn't affect its functionality. I printed the trigger guard horizontally with a 0.15mm gap between the model and the support, with layers also at 0.15mm and 3 perimeters.
Also, I chose a non-commercial license—after all, this is a part for a firearm, and I would prefer not to get anyone into trouble in your country.