1 / 11
Fishing Rod Adapter for Ham Radio Antenna Mast — zdjęcie 1
1 / 11

Fishing Rod Adapter for Ham Radio Antenna Mast

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Includes parametric model to adapt for your tripod or fishing rod diameter, and includes a bracket for the rod tip.

Ocena
0 / 5
Polubienia
26
Pobrania
111
Wydruki
0
Wyświetlenia
1073
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Used to attach your telescopic fishing rod to the end of a tripod or post for portable / QRP ham radio operations. Also includes a tip that can be slid over the top of your rod to connect a single antenna cable/balun, or a dipole type.

My tripod end is 1" diameter, and the fishing rod is 1.04" at the very base, and 1.0" up where the top bracket attaches (not that the model needs to be that precise….).

For hardware, use ¼" x 1.5" bolts, and press the nut into the knurled holder (for tool-less field operation). I made it very tight, so you'll need to hammer in the nut or warm it with a lighter or soldering iron & press it in (this way the nut won't fall out in the field).

Otherwise, see the attached Fusion file to modify it as you need.

All parts print flat with no supports, supports are designed into parts where needed.

Tagi