Yet another Heat insert press
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My own version of the heat insert press, using parts and material I had laying around
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 545
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Heat insert Press
Design by R_vdk
Application / Functions
I know there are a lot of good and decent heat insert presses around (and some really interesting and cheap kits), but I wanted to create one without ordering other stuff, instead re-using parts and material I already have in stock. By no means is this the best or only version you can use. It is however very user-friendly and works with most universal Soldering irons.
What do you need?
To print a complete set, you need the following:
- PETG +250g
- Axle/steel rod 2x100mm
- M3x18mm Hex socket / Hex button bolt (or longer) (x4)
- M3x10mm / 12mm Hex socket / Hex button bolt (x2)
- M3 heat insert (x6)
- M3 washers (x4)
- M6x20mm button bolt (x4)
- M6 nut (x4)
- M6 washers (x4)
- Bearings type SK608Z (4x)
- Recoiler (by choice) → Type used added below
- Foam anti-slip feet (optional)
How to
- Firstly assemble the carriage using the M3 mounting material. For some parts, M3 heat inserts are required. Please ensure a good angle and fit, as this influences the quality of usage when the press is finished. Use enough force to tightly fit everything without forcing and breaking the prints.
- Assemble the base using the M6 mounting material. Insert the M6 nuts from the back of the pillar and run the bolts through the bottom of the base.
- Insert the carriage into the base - BEFORE installing the recoiler carriage.
- Mount the recoiler carriage → If you use a different kind of recoiling device, feel free to ask me for a custom holder, which I will gladly provide in STL or 3MF-format
- Insert the recoiler and connect the wire to the carriage. Some creativity goes a long way here.
- Insert your soldering iron - DISCLAIMER - Don't leave a warm soldering iron too long in the press. The heat of the iron will creap upwards and completely warp / melt your mounting brackets. For this reason, the quick-release was added. Insert and pull out your iron in a matter of seconds.
- Put on some nice anti-slip feet.
Printer settings – Prusa MK3S+ & Prusa Mini+
| Setting | Value |
| Filament | PETG, ABS or some other high-temp filament |
| Nozzle | 0.4mm |
| Layer thickness | 0.2mm |
| Temperature | First layer +10°C, rest at standard values |
| Sheet | Textured or satin sheet |
| Speed settings | Factory settings |
| Infill | 10%, 2 layer wall thickness |
| Brim | No |
| Supports | Organic |
Recoiler type
https://taguard210125.en.made-in-china.com/product/KZwTPFvYQpWC/China-High-Quality-Anti-Theft-Retractor-Pull-Box-Recoil-Pull-Box.html