Yet another Heat insert press
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My own version of the heat insert press, using parts and material I had laying around
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 39
- Makes
- 0
- Views
- 545
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Heat insert Press
Design by R_vdk
Application / Functions
I know there are a lot of good and decent heat insert presses around (and some really interesting and cheap kits), but I wanted to create one without ordering other stuff, instead re-using parts and material I already have in stock. By no means is this the best or only version you can use. It is however very user-friendly and works with most universal Soldering irons.
What do you need?
To print a complete set, you need the following:
- PETG +250g
- Axle/steel rod 2x100mm
- M3x18mm Hex socket / Hex button bolt (or longer) (x4)
- M3x10mm / 12mm Hex socket / Hex button bolt (x2)
- M3 heat insert (x6)
- M3 washers (x4)
- M6x20mm button bolt (x4)
- M6 nut (x4)
- M6 washers (x4)
- Bearings type SK608Z (4x)
- Recoiler (by choice) → Type used added below
- Foam anti-slip feet (optional)
How to
- Firstly assemble the carriage using the M3 mounting material. For some parts, M3 heat inserts are required. Please ensure a good angle and fit, as this influences the quality of usage when the press is finished. Use enough force to tightly fit everything without forcing and breaking the prints.
- Assemble the base using the M6 mounting material. Insert the M6 nuts from the back of the pillar and run the bolts through the bottom of the base.
- Insert the carriage into the base - BEFORE installing the recoiler carriage.
- Mount the recoiler carriage → If you use a different kind of recoiling device, feel free to ask me for a custom holder, which I will gladly provide in STL or 3MF-format
- Insert the recoiler and connect the wire to the carriage. Some creativity goes a long way here.
- Insert your soldering iron - DISCLAIMER - Don't leave a warm soldering iron too long in the press. The heat of the iron will creap upwards and completely warp / melt your mounting brackets. For this reason, the quick-release was added. Insert and pull out your iron in a matter of seconds.
- Put on some nice anti-slip feet.
Printer settings – Prusa MK3S+ & Prusa Mini+
| Setting | Value |
| Filament | PETG, ABS or some other high-temp filament |
| Nozzle | 0.4mm |
| Layer thickness | 0.2mm |
| Temperature | First layer +10°C, rest at standard values |
| Sheet | Textured or satin sheet |
| Speed settings | Factory settings |
| Infill | 10%, 2 layer wall thickness |
| Brim | No |
| Supports | Organic |
Recoiler type
https://taguard210125.en.made-in-china.com/product/KZwTPFvYQpWC/China-High-Quality-Anti-Theft-Retractor-Pull-Box-Recoil-Pull-Box.html