Sublimation Blanks & Tutorial
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Perfect dye sublimation for 3D prints
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Standard Digital File License
These models can also be found for free on Makerworld, but by joining my club here you are helping to support me as a maker.
I invested in dye sublimation equipment primarily to develop a repeatable process for applying images/decals/etc to my 3D prints. I am happy to share it here with you as well as various blanks that you can print and use for this process.
I will be adding more blanks for you right here as soon as I make them!
Printing
I use white Bambu PA6-GF for this process. Magigoo PA is highly recommended for adhesion and release. Turn your build plate up to 100c and wait for your chamber to be above 40c before printing.
When printing items that are not basic and flat you need better layer adhesion than the default Bambu PA6-GF profile (which to its credit does make beautiful prints quickly). Turn the nozzle up to 290 degrees and consider using silent mode to help have a stronger model.
After printing please let the model cool completely on the print bed, or it may warp.
Pre-Pressing
Wash any glue off models after printing, wipe dry, and hot press for 10 seconds to remove moisture, taking precautions to keep the model shape afterwards while it fully cools by putting something heavy on it.
Post-Pressing
Finally, if you have pressed your model properly and find white bits on your model these are usually fine bits of paper that rub or wash off easily.