Liczymy pasujące modele…
Stop spilling your Angelus leather dyes! Holds a 3oz (90ml) bottle and a wool dauber to organize your dye table.
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
HO Scale Goodyear Blimp Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: MatterHackers.com PLA white Notes: HO Scale Goodyear Blimp Category: Hobby
Designed to keep one bottle of dye upright while you work, as well as holding the cap and dauber off your work area so dye doesn't get everywhere. It has feet on both sides for added tip resistance.
this is a doweled dye that can be used to hand beat your own 8" half round outlets, make the length of your piece 3.84375 pie + your pipe lock size (3/8 or 1/4" should work) and if its too tight take a bit off your diameter * pie number…
Modular hexagaonal design that push fits together, I added the 3 pin locks to stabilise the racks once multples are added. they do require some fouce to lock them once you connect on more than 2 faces. Designed to be used with Aldi or…
This will replace the end caps, spacer, and create a mounting point that uses existing holes where kick panels go on a Datsun 620. I plan to mount on the right side (passenger side in the US and left-hand-drive countries), but I believe…
this is a doweled dye that can be used to hand beat your own 8" half round outlets, make the length of your piece 3.84375 pie + your pipe lock size (3/8 or 1/4" should work) and if its too tight take a bit off your diameter * pie number…
Modular hexagaonal design that push fits together, I added the 3 pin locks to stabilise the racks once multples are added. they do require some fouce to lock them once you connect on more than 2 faces. Designed to be used with Aldi or…
11-10-2024 M5 nut lower have been added. for a stronger connection it will use a 30mm long M5 bolt with 3d printed grips ------- FGC68 GEN2 Updarted the link to the new manuals and parts list can be found here…
11-10-2024 M5 nut lower have been added. for a stronger connection it will use a 30mm long M5 bolt with 3d printed grips ------- FGC68 GEN2 Updarted the link to the new manuals and parts list can be found here…
Hey all leatherworking is another hobby of mine and it happened more times than id like to admit, that I tipped over my dye bottles. Problem is: Anything that's good in dyeing dead animal skin is also good in dyeing living human skin (and…
I originally stored my resin dyes in the cardboard boxes they came in, but the boxes were flimsy and not ideal. I created these to help keep them organized and upright in my craft drawer. Recommended settings: 0.2 mm layer height & 3 walls
While repairing a clogged valve on my compressor (pieces of the gasket break off inside), I did a test run with the cover off. Unfortunately the fan blades caught my shirt. The cooling fan blew apart, and I couldn't find a replacement.…
Piattaforma DYE Longer Nano Pro, semplice da stampare o da tagliare al laser, si utilizza delle lame da cutter e alcune calamite servono per bloccare il pezzo. Il Supporto per le lame lo puoi anche tagliare da alcuni scarti di legno che…
Nozzle Narrow Attachment for Hair Dyer (Kennedy) it has a 45.7mm Diameter Hole for the attachment and the air outlet is 5mm with a 40mm nozzle. Print in PLA if you use only Cold Air The Design files are located in OnShape:…
Give your Angelus dyes the display they deserve! Store 4 bottles of dye on the Skadis system, with a place to show what color this is.
I designed this 3D model as a forehead protector for the Dye I4 paintball mask. The piece extends the upper coverage of the mask, providing additional protection for the forehead area without compromising visibility or comfort. It…
Summary Dye logo on a drink coaster. Great design and easy to print in ABS/PLA/PETG. Print Settings Printer brand: Bambulabs Printer: Bambu X1C Rafts: No Supports: No Resolution: .2 Infill: 20 Filament material: ABS Filament brand:…
REMIXED Wheel for the Lego McLaren MP4/4. I just put the logos on the inside as well as the original logos on the outside. the MP4/4 had logos on the inside as well so it just a bit more realistic. Its hard to print but i got there…
Desktop holder for Adyen NYC1 card payment terminal. Securely holds card payment terminal and with a 90 degree angled USB-C cable can be constantly charged while mounted.
3x4 Gridfinity holder to hold 15 bottles of Alumilite dyes or any other bottle that is less than 32mm in diamter. Created using the OpenSCAD creator at https://gridfinity.perplexinglabs.com/
There are several of these out and about but none fit my needs so I designed this one. I wanted something with a wide base to prevent tip over and catch drips. I wanted the bottle to slide in and out easily. Most importantly, since I…
Needed a nice way to store expoxy resin figment bottles for my moms crafting table. Whipped this up for her and after seeing some of her group members requesting it thought others might like it as well. I Made this version to fit a 22mm…
This is an alternative to other speedfeed options for the DYE LTR. It allows you to run a speedfeed and still open the loader fully for loading/unloading. Similar to how the spire/ctrl/r2 loaders function. You can use normal LTR…
Remixed the original design to be closer to the OEM trigger from Dye in width and shape. I printed it upright on the nose with organic supports and no rafts @ .22mm layer height with Elegoo PLA+ (see attached for reference).
Update 2025-04-12: Added an improved version without pre-travel adjustment (bigger tolerance for dowel pin, beefier join between upper and lower part) -------------------------------------------------- Just something for the paintball…
Helpful Tool to Store Stained Glass or for Light Edge Dying or Drying Leather Edges after Dying, Painting, Gluing or Prepping Work Use with specially designed Holder for Leather Edge Dyeing & Drying Rack - Expandable Display 14 Slots from…
Holder for Leather Edge Dyeing & Drying Rack - Expandable Display
Cheek Protection fasteners for mask Dye 0.08 mm fill 100%
This is a mount designed to attach an Insta360 GO 3S to a Dye i4 (or i5 ) mask for capturing first-person footage while playing airsoft or paintball . Update [7/4/2025] - Added new part ("Mount_Frame_EXT_Battery") that allows user to…
3D surface scan of Dye i4 Paintball Mask. Scan is about 75% complete. Used Shining3D EinScan Pro 2X. (+-0.5mm).
Use a pair of M6x8x8 heat set inserts in the holes and reuse screws off factory ECU. Print without supports. Use a material that can withstand being in your Miata in the summer like ASA. I used translucent PETG to keep with the theme of…
Some basic dyes for extruding handle shapes from a Brent brand clay extruder: https://shop.amaco.com/brent-extruder-hd/ Comes with a selector to choose the profile extruded. NOTE: Adjust the Z height of the pieces to increase strength if…
This will replace the end caps, spacer, and create a mounting point that uses existing holes where kick panels go on a Datsun 620. I plan to mount on the right side (passenger side in the US and left-hand-drive countries), but I believe…
After taking a alternative Japanese Batik silk dyeing class, I wanted to continue making. I came up with an expandable frame with pegs for consistent pinning of silk handkerchiefs or scarves. All pieces pressure fit, so start with test…
I designed this Disc Dye Vice to more easily center (or off center) discs on the record player when spin dyeing. It should collapse enough to fit most drivers, and expand to fit most mid-range and putters. Printed at .2 layer height and…
Made this for my wife to hold all of her resin dyes(36 total) fully printed so i didn't need any hardware PLA is fine, it's what i used No supports needed, bridges are minimal. i did 50% infill, probably not needed. The bottles of dye we…
I wanted to get more desiccant into my polydryer boxes so I modified the spool bolt to have fewer threads (that went mostly unused on a 1kg spool) to contain some extra.
Replaces the feedneck adjustment screw with a tumbscrew. The screw head should fit tightly and may need to be pressed in. Uses a SHCS #8-32x1" screw. I used a Hillman that I got from Ace Hardware.
no more accidental dropping of the eggs during dying due to the clumsiness of the spoons
Print in TPU with fuzzy skin on Contour. Remove the macroline fitting and press it onto the reg.
Hello All, I have here a Leather Dye Station which will hold 3 of the 2.2 fl. oz. samplers for Fiebings Leather Dye. Also 6 separate compartments for wool daubers to keep the clean ones in the back away from the active/used ones in the…
I have here a Leather Dye Station v2 which will hold 2 of the 4 fl. oz. dyes for Fiebings Leather Dye. Also 6 separate compartments for wool daubers to keep the clean ones in the back away from the active/used ones in the front. Enjoy!
I made this to hold onto the LED ring part of the Windows MR controller. This makes it so I can hang the two controllers on my desk. Should work for other places you might want to put it as well as long as the width is less than 16.5mm.…
I got this set of 15 Alumilite resin dyes from Rockler. They work great for silicones, epoxies, and polyurethanes, and also pair well with mica powders. I wanted a tray to keep them organized and make it easy to move them around. I…
An elegant dark-fantasy elf lady surrounded by large enchanted flowers and twisting branches, designed as a detailed decorative display statue. LadyElf is a highly detailed fantasy statue featuring an elegant elven woman surrounded by…
The holes for the clickers will need supports, not supports for the screw holes. Print standing upright with the closed end on the bed, opening facing up. I printed with PETG for added structural stability and heat resistance. Use M3x20…
This is a 127mm (5") x 127mm (5") hexagon plate that is paired with legs and support to stand the piece 19.05mm (¾") off of the ground. Print as many as you need, we will print 4 to support 1 large t-shirt. This helps keep the colors from…
I have designed a jig to help you with spin dyes, I recommend putting some silicone mats over top. you can buy them on amazon for baking, they grip well, are thin and a few strips will go a long way.
Walkie/Radio system for dye i4 with built-in PTT System is testede and Works very well, very good sound both as sender and receiver, Boom and wiring diagram is attached to this thread, plus some pictures of how it comes together BOM Pin…
Holder Stand for Refillable dye pens for IVAN 15mm dye pens for leathercraft , Holds 6 pc, full size 120mm x 80mm
Holder Stand for Refillable dye pens for IVAN 10mm dye pens for leathercraft , Holds 6 pc, full size 120mm x 80mm
Hang your favourite DYE paintball logo on your wall For color swap: In this picture i used black first, then blue, then white
UPDATED (10 July 2023): added a normal gopro style mount, with gopro sized dimensions. See file: runcam_thumb_GOPRO_mount.stl This is a very niche remix, it's a runcam thumb mount, using the gopro mounting system, but the system uses m3…
Do you need to organize your paint markers and resin dyes? This holder/stand will hold up to 48 markers and 24 resin dye containers. By default the marker holes will hold Craftsmart and Artistro fine point paint markers or Sharpie fine…
11-10-2024 M5 nut lower have been added. for a stronger connection it will use a 30mm long M5 bolt with 3d printed grips ------- FGC68 GEN2 Updarted the link to the new manuals and parts list can be found here…
11-10-2024 M5 nut lower have been added. for a stronger connection it will use a 30mm long M5 bolt with 3d printed grips ------- FGC68 GEN2 Updarted the link to the new manuals and parts list can be found here…
Remix of Nutcrapper's i4 Gopro mount. I redesigned this mount to be printed with the rear side of the mount on the print bed, there are also other minor changes. I found the original design to break easily along the 'neck' when the GoPro…
Removed the base and dauber holder, and added a 12-degree wedge with the honeycomb insert on it to create a dye bottle holder that can hold either an Angelus 3-oz bottle of leather dye, or a Fiebing's 4-oz bottle on a honeycomb storage…
A model for some emergency dice. I recommend they are printed at 100% infill, where they will take about 10g of filament and gives the dye a nice weight in the hand.
I hate that this good jackstand with lock comes without a soft interface pad, so I designed a pad for it. It has a thickness of 2mm and fits like a glove. Let me know what you think ;) Print Settings Printer Brand: Prusa Printer: I3 MK3S…
My original spin dye jig and a lite version that allows for off center dyeing. After using my previous spin dye jig for a while I started to have some fun moving off of the jig to do off center dyes. I decided to try and come up with a…
Diseñe esta visera para ampliar la protección que ofrecen las mascaras de paintball/airsoft de tipo Dye i4 o su clon FMA F1, ya que suelen dejar la frente descubierta. Son modelos muy básicos ya que no tengo conocimientos de diseño y los…
Build a D20 gaming die that tells you what number you rolled! Made with 3D printed parts, CircuitPython and an Adafruit RP2040 PropMaker Feather. The two halves are 3D printed and house the all-in-one dev board along with a mini speaker,…
Print them 2x, the just flip one, have m4 screw go through them, you will need an insert for them, ( i used the ones you melt in) Use TPU for the rings if you want to use them, otherwise i dont think they are needed.
A prototype design that utilizes linear actuators to dye yarn inputted into a loom.
Šablona (strom) je vytvořena pro nastříkání barvy na textil. Created for applying/spraying paint onto the textile.
Hey all leatherworking is another hobby of mine and it happened more times than id like to admit, that I tipped over my dye bottles. Problem is: Anything that's good in dyeing dead animal skin is also good in dyeing living human skin (and…
A colleague needed a little holder for their antibody containers, to avoid accidentally knocking them over during experiments. Custom made to fit these types of glass vials, with a diameter of 22mm. Single and double holder provided, as…
Printed by prusa mk3s+ Matirial : Tpu 95 support : tree support (organic) I used the option autopainting in PrusaSlicer and recommend you too. The grid faces to the surface. Push the connector to the high hole and than pull from the two…
This small rack holds 6 edge dye markers, each having a 24mm diameter. I obtained mine from RM Leather Supply and I don't know if there is a standard size. Printed in PLA with 0.2mm layers, 0.4mm nozzle, 10% infill.
Adapter to mount a gopro on top of your dye i5 (maybe i4 too). The pictured design is a little out of date, I rounded and smoothed out the whole model. You will need a short M4 screw along with a nut and a GoPro mounting screw and nut…
Super easy to print. No instructions needed.
Shapeways and DJI had a contest for 3d printable drone accessories to be used in water search and rescue operations. I had a lot of fun with fluorescein dye, PLA, and 3d printers, and Rhino5. I was a runner-up with a prize of $500 credit…
Locking tab for Dye Rotor ROTOR/LT-R TOP SHELL LOCK- SLIDE TAB Printed with.. Infill: 100% Material: PLA
The egg holder is a simple design, intended to allow you to hold the egg in the bunny dyer, dye your eggs, then drop the dyer through the holder and slide the dyer out, to make the whole process as easy as possible! The dyer is as…
Pick the variant of your choice, 30 or 15, then add 2 ink holder hooks which slot into the back of the model with the hook pointed down. I've also exported my fusion file as a .step which I hope is helpful.
Luxens 20 ml Dropper Cap for Dye Diameter: 17.5 mm Height: 12 mm Thread Pitch: 3 mm There are two versions, with snap-on or screw-on cap. Follow the instructions from link for printing.
Bravo 40 80 ml Dropper Cap for Dye Diameter: 14.8 mm Height: 6 mm Thread Pitch: 1.4 mm There are two versions, with snap-on or screw-on cap. Follow the instructions from link for printing.
I know it's a $ 2 part, but after mine broke I couldn't find it in my country and buying it from Amazon would mean paying more for shipping so I designed and printed mine. I printed mine in PETG, but my guess is that any other material…
A Forehead Protector for the DYE I5 Mask. I use it for airsoft to protect my forehead. Print the mount with the visible front showing side up, then the clips will last longer if you bend them Youll need two M3x16mm screws and two M3…
You can put this on a metallic surface and it won't move while you're painting spaghetti. It's flat on one side for wiping your brush! Uses 6 mm by 3 mm disc magnets. Use a drop of superglue if you never want them to come out. If you're…
Do not buy a DJI product. In oder to use it the manufacturer forces you to install an app on your smartphone and create an account. That app is so full of junk, bloatware and spyware that even the data-hungry Google refused to add it to…
there are 2 options 1 to 3D print every thing. there for you will need 2x M3 bolts that are 25mm or 30mm long or 2 go for the DIYver this means that you will just use your own base plate and drill and screw the DIYver mag on to that -…
there are 2 options 1 to 3D print every thing. there for you will need 2x M3 bolts that are 25mm or 30mm long or 2 go for the DIYver this means that you will just use your own base plate and drill and screw the DIYver mag on to that -…
This is a simple hair dryer holder with a diameter of 55 mm that allows you to store your hair dryer. Printed with ABS minimum 30% infill to get enough strength.
