1 / 2
FGC-68: display stand for DHM Dye Half mag lower — zdjęcie 1
1 / 2

FGC-68: display stand for DHM Dye Half mag lower

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

also works for other Dye Dam half mags markers

Ocena
0 / 5
Polubienia
2
Pobrania
15
Wydruki
0
Wyświetlenia
96
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

there are 2 options
1 to 3D print every thing. there for you will need 2x M3 bolts that are 25mm or 30mm long

or

2 go for the DIYver this means that you will just use your own base plate and drill and screw the DIYver mag on to that

-

print settings:
0.2 layer height should be fine.
you can use the 6 layer walls and a 40% infill.

Tagi