1 / 2
FGC-68: display stand for DHM Dye Half mag lower
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
also works for other Dye Dam half mags markers
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
there are 2 options
1 to 3D print every thing. there for you will need 2x M3 bolts that are 25mm or 30mm long
or
2 go for the DIYver this means that you will just use your own base plate and drill and screw the DIYver mag on to that
-
print settings:
0.2 layer height should be fine.
you can use the 6 layer walls and a 40% infill.