Dye JC Scythe DSR as Airsoft Trigger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Full blown double trigger (two fingers usable) for airsoft
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 2025-04-12: Added an improved version without pre-travel adjustment (bigger tolerance for dowel pin, beefier join between upper and lower part)
--------------------------------------------------
Just something for the paintball guys among us. I took https://shop.dyepaintball.com/products/jc-scythe-dsr-trigger-open-source-free-download and changed it to be useable for airsoft. This involved changing the complete upper part, the bearing and a bit of the geometry. Regular trigger guards will not fit.
Tolerances are tight. The design is made to receive a 3 x 15,8mm dowel pin by press fit. You might try a M3 screw but I guess it will wiggle. Pre- and post-travel can be adjusted. For post-travel a M3 x 6mm grub screw will do the job. You might use some longer ones for easy access. For pre-travel hm... be creative with the grub screws :)
Brim is mandatory.
Category: Sport & Outdoors