Dye JC Scythe DSR as Airsoft Trigger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Full blown double trigger (two fingers usable) for airsoft
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 2025-04-12: Added an improved version without pre-travel adjustment (bigger tolerance for dowel pin, beefier join between upper and lower part)
--------------------------------------------------
Just something for the paintball guys among us. I took https://shop.dyepaintball.com/products/jc-scythe-dsr-trigger-open-source-free-download and changed it to be useable for airsoft. This involved changing the complete upper part, the bearing and a bit of the geometry. Regular trigger guards will not fit.
Tolerances are tight. The design is made to receive a 3 x 15,8mm dowel pin by press fit. You might try a M3 screw but I guess it will wiggle. Pre- and post-travel can be adjusted. For post-travel a M3 x 6mm grub screw will do the job. You might use some longer ones for easy access. For pre-travel hm... be creative with the grub screws :)
Brim is mandatory.
Category: Sport & Outdoors