lego torsen diffrential (with lego gears)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a Torsen differential for Lego that uses 6 8t gears, 6 2L axels, 2 1L worm gears, 2 axels, and 3 pins.
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 287
- Wydruki
- 1
- Wyświetlenia
- 1883
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
I looked all over for a Lego Torsen diffrential but all i could find was one on Shapeways. I don't want a part, I want a file i can make multiple parts from. not to mention it used helical gears not spur gears and worm gears, making it more of a limited-slip differential, and I wanted to use Lego gears. well… I made one, not perfect but its a start.
I recommend using a 4.8 mm drill bit to ream the holes(after curing if using resin), lego is way more precise than most printers(or I suck at printing).
other than the outside gear both sides are the same, so if you want to use 2 motors on the same gearing its an option.