1 / 3
lego torsen diffrential (with lego gears) — image 1
1 / 3

lego torsen diffrential (with lego gears)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I made a Torsen differential for Lego that uses 6 8t gears, 6 2L axels, 2 1L worm gears, 2 axels, and 3 pins.

Rating
5 / 5
Likes
57
Downloads
288
Makes
1
Views
1,888
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I looked all over for a Lego Torsen diffrential but all i could find was one on Shapeways. I don't want a part, I want a file i can make multiple parts from. not to mention it used helical gears not spur gears and worm gears, making it more of a limited-slip differential, and I wanted to use Lego gears. well… I made one, not perfect but its a start.

I recommend using a 4.8 mm drill bit to ream the holes(after curing if using resin), lego is way more precise than most printers(or I suck at printing).

other than the outside gear both sides are the same, so if you want to use 2 motors on the same gearing its an option.

Tags