Flexagon Fidget
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fully printed flexagon fidget toy, you turn it inside out in an infinite loop for endless fidgeting.
- Ocena
- 4 / 5
- Polubienia
- 280
- Pobrania
- 838
- Wydruki
- 2
- Wyświetlenia
- 7449
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
To print this flexagon print 3 of the “Flexagon Regular” files along with 3 "Filament Hinge Link' files. You can also print the looser tolerance file if your printer is not very accurate. Print the Snap On Link at your own risk as I have had limited success with a snap on link.
To assemble the flexagon, cut 6 bits of filament about 12mm long, put the hinge between the 2 prongs then push the filament into the hinge and the prongs. Repeat for all the sides until fully assembled. I posted some pictures to help visualise the assembly.