Banana Plug terminal mod for Technics 12 inch floor speakers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convert your old Technics 12 inch floor speakers to accept banana plug inputs
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
This is a simple back plate for replacing the wire terminals on Technics 12 inch floor speakers with banana plug sockets.
You'll need this set of banana plug terminals for this project:
https://www.amazon.com/gp/product/B07CK1VL3B/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
As a word of caution, the original wire terminal backplate is permanently attached to the speaker's crossover circuit board. So, this conversion involves cutting the terminal connections to free up the crossover board and soldering wires to the crossover where the terminals once existed. It's easy to do, but if you aren't comfortable with the thought, this probably isn't the project for you.
- Print 2 copies of the backing plate at .2mm layer height with no supports and 15% infill.
- Attach the banana plug sockets to the backplate as seen in these pics:
3. Attach the crossover board to the lock nuts on the back of the banana plug terminals:
4. Screw the crossover onto the backplate with the capacitors facing up. I've replaced the capacitors on my crossover with newer caps, so your crossover will look different:
5. Replace the backplate and screw it back into place. Enjoy your banana plug freedom!
