1 / 3
10.1" Display-H T-Feet Monitor Legs
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are feet for a LCD display bought for a raspberry pi weather station monitor, to replace the angled ones included.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought my “Display-H” from aliexpress, and the legs that came with it didn't work well for me, since the angle made the monitor hard to see from certain angles, so I threw together these replacement legs which hold the monitor stable in a vertical position. It reuses the same screws that came with the display (about 2.4mm diameter for the threads, and 4.4mm diameter for the head.
I printed them in PLA at 0.2mm resolution with 15% infill, and they are working fine.