1 / 3
10.1" Display-H T-Feet Monitor Legs — image 1
1 / 3

10.1" Display-H T-Feet Monitor Legs

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€1.25 – €1.52 net (excluding VAT)

For file: 10-inch lcd-h monitor t-feet_0.4n_0.2mm_PLA_MINI_1h24m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.38 excluding VAT (range midpoint).

Weight reported by the author
17 g
Print time reported by the author
1.4 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

These are feet for a LCD display bought for a raspberry pi weather station monitor, to replace the angled ones included.

Rating
0 / 5
Likes
3
Downloads
18
Makes
0
Views
260
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

I bought my “Display-H” from aliexpress, and the legs that came with it didn't work well for me, since the angle made the monitor hard to see from certain angles, so I threw together these replacement legs which hold the monitor stable in a vertical position. It reuses the same screws that came with the display (about 2.4mm diameter for the threads, and 4.4mm diameter for the head.

 

I printed them in PLA at 0.2mm resolution with 15% infill, and they are working fine.

Tags