Ikea Besta cable guide clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little clip to prevent cables routed behind an Ikea Besta from dropping to the floor.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
This clip prevents cables routed behind an Ikea Besta from dropping to the floor. It has a hole for optional screw mounting in case you need extra stability, but in my usecase the clip-only mounting was strong enough to keep everything in place.
The clip is printed sideways - no supports necessary. As a further upside, the anticipated physical stress is perpendicular to the layer lines making the print less prone to breaking.
My print was done with Sunlu Meta PLA which worked out great and allows for the appropriate flexibility. I suppose PETG would be a great material choice too.