hub3 wall mount adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for wall-mounting CANDY HOUSE's hub3 with stapler.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
CANDY HOUSE's hub3 can be wall-mounted using a stapler with a No. 10 needles.
By using the stapler, the holes in the wall can be made smaller.
The staples that can be used are those that can be opened as shown in the photo.
When fixing the adapter, use the open stapler to align the needle with the holes.
The stapler can be removed relatively easily by pulling the adapter toward the front.
Support is not normally required for printing.
Caution.
The adapter should be installed in a location where it will not hit people or objects when dropped.
Make sure that the adapter is securely fastened both before and after installing the hub3. If not, the hub3 may fall and break.