hub3 wall mount adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for wall-mounting CANDY HOUSE's hub3 with stapler.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
CANDY HOUSE's hub3 can be wall-mounted using a stapler with a No. 10 needles.
By using the stapler, the holes in the wall can be made smaller.
The staples that can be used are those that can be opened as shown in the photo.
When fixing the adapter, use the open stapler to align the needle with the holes.
The stapler can be removed relatively easily by pulling the adapter toward the front.
Support is not normally required for printing.
Caution.
The adapter should be installed in a location where it will not hit people or objects when dropped.
Make sure that the adapter is securely fastened both before and after installing the hub3. If not, the hub3 may fall and break.