Garmin watch band strap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement piece to keep the watch band from flapping about.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 125
- Wydruki
- 2
- Wyświetlenia
- 408
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A replacement part for a Garmin watch wrist band. The original strap that secures the loose end failed. I made this replacement with a similar peg to keep it from sliding around. It is slightly thicker than the original, but I've not noticed the difference.
I moved the post from the center to the edge so it would print without supports. TPU can be problematic with supports so I tend to design them away as much as possible.
Printed wirh Ninjatek Cheetah TPU. Prusa has the settings. The only change i made was adding a perimeter to create a solid print. 0.2mm layer height for strength.