Dragon Wine Bottle Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All Things STL Wine bottle holder!!
- Ocena
- 4,941 / 5
- Polubienia
- 727
- Pobrania
- 2776
- Wydruki
- 23
- Wyświetlenia
- 10 973
- Oceny
- 17
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
NO SUPPORT NEEDED Dragon Wine Bottle holder!!!
I have 3 models listed, one with a raft for more support (if you are going to have it where it can be bumped) and one without plus one with a raft that looks like the dragon is laying in water or fire. It will say you need support but I have printed it 4 times now and have not used support and it comes out flawless on my Bambu. It will work with most printers 220x220 or larger MK3/4. You can shrink it a little and it will still work.
I suggest using 15% infill and adaptive cubic! It will print in 14 hours if you do. I tried other infills and it was MUCH slower with no real benefit.
If you are not a member of my club please consider joining my club! I come out with useful prints every month. I also take requests!!
Thanks, Rob