Dragon Wine Bottle Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
All Things STL Wine bottle holder!!
- Rating
- 4.941 / 5
- Likes
- 727
- Downloads
- 2,776
- Makes
- 23
- Views
- 10,973
- Reviews
- 17
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
NO SUPPORT NEEDED Dragon Wine Bottle holder!!!
I have 3 models listed, one with a raft for more support (if you are going to have it where it can be bumped) and one without plus one with a raft that looks like the dragon is laying in water or fire. It will say you need support but I have printed it 4 times now and have not used support and it comes out flawless on my Bambu. It will work with most printers 220x220 or larger MK3/4. You can shrink it a little and it will still work.
I suggest using 15% infill and adaptive cubic! It will print in 14 hours if you do. I tried other infills and it was MUCH slower with no real benefit.
If you are not a member of my club please consider joining my club! I come out with useful prints every month. I also take requests!!
Thanks, Rob