1 / 1
The 199 - An AWD, 60V, Triple Z mod of the T100 — zdjęcie 1

The 199 - An AWD, 60V, Triple Z mod of the T100

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The mod is an AWD, 60V version of the T100 V1.1

Ocena
0 / 5
Polubienia
12
Pobrania
32
Wydruki
0
Wyświetlenia
578
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

*** DO NOT ATTEMPT IF YOU ARE NOT COMFORTABLE WITH SOLDERING AND HIGH VOLTAGES ***

Description

After building and tuning the T100 V1.1 to around a 5 minute BSO, I now want more. This mod is my attempt at ultimate speed. This mod is currently untested, and likely does not work in it's current configuration, so print at your own risk. For any questions, I highly recommend you check out the The 100 Discord.

Print Settings

  • 0.25 Layer height
  • 0.5 Line width
  • 3 Top layers
  • 3 Bottom layers
  • 3 Walls
  • 25% Infill
  • Grid Infill Pattern

I recommend printing the motor holders out a high temp material like ASA, all other parts should be fine in PLA