1 / 1
The 199 - An AWD, 60V, Triple Z mod of the T100
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The mod is an AWD, 60V version of the T100 V1.1
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 32
- Makes
- 0
- Views
- 578
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
*** DO NOT ATTEMPT IF YOU ARE NOT COMFORTABLE WITH SOLDERING AND HIGH VOLTAGES ***
Description
After building and tuning the T100 V1.1 to around a 5 minute BSO, I now want more. This mod is my attempt at ultimate speed. This mod is currently untested, and likely does not work in it's current configuration, so print at your own risk. For any questions, I highly recommend you check out the The 100 Discord.
Print Settings
- 0.25 Layer height
- 0.5 Line width
- 3 Top layers
- 3 Bottom layers
- 3 Walls
- 25% Infill
- Grid Infill Pattern
I recommend printing the motor holders out a high temp material like ASA, all other parts should be fine in PLA