Original Prusa MINI Enclosure side mount bracket for temperature / humidity sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original temperature / humidity sensor bracket with 63mm holes for mounting it on the side and not on front/back.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 430
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
About
Original Prusa MINI Enclosure comes with the temperature / humidity bracket which can be mounted only on the front/back holes of the enclosure, due to the fact that those holes are 60mm apart.
I modified the Guide & Covers > Thermometer-bracket.stl and extended the part so that there are 63mm between the screw holes, so that it can be mounted on the side panel.
Printed the flat one and it works well attached to the top edge, but becomes unreadable when mounted on the bottom edge due to the fact how liquid crystals work.
Later on I added quick modifications to allow mounting it on the bottom with different angles.
Notice I have not tried to print any angled model yet. So beware there may be some issues with those models.
Please give a like and post makes and provide comments for further improvements.
Print
- 0.2mm layer, 0.4mm nozzle, 15% infill, PETG or something better recommended to withstand the temperatures inside.
- notice gcode contains moves for my custom timelapse video capture (print head moves to back and then to Z axis), so provided gcode file is just for rough estimation of the print time + required filament,