Enclosure Feed Thur
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament feed through for printing enclosure with a 3/4" plywood floor. can span 15-25mm thickness spans
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
during COVID I couldn't get an IKEA LACK table so I built something similar from scrap wood in the shop. I drilled a sloppy hole that split the plywood because I did not put a backing plate when I drilled. So I made this feed through to hide the worst of the splintered hole.
Provides a smooth filament feed from the filament holder to the printer part of the enclosure.
My PETG print benefited from cleaning up the threads with a 8x1.25 tap and die.
The heat from the printer helps warm the filament's enclosure and reduces the moisture in the filament as opposed to just open room air.