Enclosure Feed Thur
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament feed through for printing enclosure with a 3/4" plywood floor. can span 15-25mm thickness spans
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
during COVID I couldn't get an IKEA LACK table so I built something similar from scrap wood in the shop. I drilled a sloppy hole that split the plywood because I did not put a backing plate when I drilled. So I made this feed through to hide the worst of the splintered hole.
Provides a smooth filament feed from the filament holder to the printer part of the enclosure.
My PETG print benefited from cleaning up the threads with a 8x1.25 tap and die.
The heat from the printer helps warm the filament's enclosure and reduces the moisture in the filament as opposed to just open room air.