1 / 4
MK3 + Delta PSU Support Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support bracket for the MK3 with the new Delta PSU.
- Ocena
- 4,667 / 5
- Polubienia
- 11
- Pobrania
- 235
- Wydruki
- 1
- Wyświetlenia
- 2048
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 6)Remiksy (0)Kolekcje (45)Powiązane
Support bracket for the MK3 with the new Delta PSU. This is used when removing the PSU to make an enclosure for printing things like ABS. (Power supplies don't appreciate the heat like ABS filament does!)
Print instructions
Suggested Settings
Slic3r PE .15 quality with the following modifications:
- 6 perimeters (prevents infill in the large sail support)
- 50% infill (for more rigidity)
Other notes
- Print it so the hex nut holders are facing up.
- I didn't need supports, a raft, or anything else.
- You'll need to replace the PSU upright bolts when attaching this stand with a bolt/nut. I used #8-32 button-head bolts to secure the uprights, but the hole and hex inset should fit metric bolts as well.
