1 / 2
IKEA Kallax Gridfinity Drawer Baseplates
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity drawer insert for IKEA Kallax drawers, with bins "left justified" to maximize usability of residual space.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 142
- Wydruki
- 1
- Wyświetlenia
- 1068
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (53)Powiązane
Overview
Yet another set of Gridfinity baseplate inserts for the IKEA Kallax drawers.
Existing work includes excellent models from JacenToth, scorf, Alex_235390, and others.
Variations in this model include:
- Shifts bins to the left side of the drawer rather than centering them. This puts the residual width in a single 24mm section on the right rather than 12mm on each side. For me this is more functional as a place to store long or thin items (rulers, deck of cards, etc..)
- Adds 1mm padding to the front to keep bins from rubbing against the screw that fastens the drawer pull
Printing
- Printed on MK4 with Input Shaper profile and 0.6mm nozzle
- Print setting 0.20mm Structural with 15% gyroid infill
- Filament was Fillamentum PLA in Concrete Gray using built-in preset
- No supports are required
Credits
Baseplates created in Fusion 360 using the outstanding Gridfinity Generator Plugin