Pancake Compressor Replacement Feet/Anti-Skip Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The replacement feet for pancake compressors as well as skipping on a wooden surface. =P
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
ABOUT:
Made some anti-skip feet and replacement feet for my pancake compressor that lives on a wooden board under my metalworking bench. Most people keep it under a workbench of some kind. Hopefully it's wood.
This will work with any pancake style compressor's feet. Porter Cable, Craftsman, Ryobi, etc…
If you need another diameter for yours, I can help out.
I only have one pancake compressor so I don't know what sizes are out there.
FEATURES:
Provides new feet and keeps the compressor in one place without skipping. Will accommodate a bolt or screw depending on what size you need. The replacement feet have a tapered hole for accommodate a bolt and a nut. The anti-vibration feet have an ID of 40mm. You can use either size depending on your needs (5mm or 10mm).
HARDWARE NEEDED:
(3) 5mm or 10mm ¾" or 1" long fasteners with nuts.
PRINTING SUGGESTIONS:
I would use PLA, TPU 95a, or PEBA. Basically anything shock resistant.
It shouldn't take more than 1hr to print all three.
I would do 10-15% infill for the anti-vibration feet and 45% for the replacement feet.
No brim is needed because of the large print surface.