Pancake Compressor Replacement Feet/Anti-Skip Feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The replacement feet for pancake compressors as well as skipping on a wooden surface. =P
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 20
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
ABOUT:
Made some anti-skip feet and replacement feet for my pancake compressor that lives on a wooden board under my metalworking bench. Most people keep it under a workbench of some kind. Hopefully it's wood.
This will work with any pancake style compressor's feet. Porter Cable, Craftsman, Ryobi, etc…
If you need another diameter for yours, I can help out.
I only have one pancake compressor so I don't know what sizes are out there.
FEATURES:
Provides new feet and keeps the compressor in one place without skipping. Will accommodate a bolt or screw depending on what size you need. The replacement feet have a tapered hole for accommodate a bolt and a nut. The anti-vibration feet have an ID of 40mm. You can use either size depending on your needs (5mm or 10mm).
HARDWARE NEEDED:
(3) 5mm or 10mm ¾" or 1" long fasteners with nuts.
PRINTING SUGGESTIONS:
I would use PLA, TPU 95a, or PEBA. Basically anything shock resistant.
It shouldn't take more than 1hr to print all three.
I would do 10-15% infill for the anti-vibration feet and 45% for the replacement feet.
No brim is needed because of the large print surface.