Office Building for 6mm Scale (1 Hex, Level 3 for CBT)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a basic, small office building designed for 6mm scale wargaming. It should be suitable for modern through sci-…
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 195
- Wydruki
- 1
- Wyświetlenia
- 590
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings.
This is a basic, small office building designed for 6mm scale wargaming. It should be suitable for modern through sci-fi settings. In BattleTech terms, it's a 1 hex, level 3 building.
For all of my buildings, I recommend 1.2mm wall thickness. I design them to be “acceptable” at .2mm layer height for FDM printers.
Work in progress, but it's a pretty basic box and should print easily. The roof detail is pretty fine and may not print completely, but this is unlikely to be noticeable unless you're quite close to it.
Notes:
Given height relative to the footprint, use a brim to help keep it stable. Supports should not be needed if an infill is used. Note that the 4 columns next to the doors are not meant to be removable supports, they're part of the design.
How I Designed This
Design Notes
This was designed using Fusion 360, emphasizing what should be an easy print instead of advanced or detailed features. Even though there is detail on the roof, it is pretty basic so a wargaming figure should be able to stand on top as long as it's got a good base between 25 and 30mm and the figure isn't too tippy.
Category: Toy & Game Accessories