Outside mount for Ubiquiti Unifi AC Mesh with POE adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for Ubiquiti Unifi AC Mesh with POE adapter.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A mount for Ubiquiti Unifi AC Mesh with POE adapter (UAP-AC-M).
I printed the top using PETG filament, and bottom with TPU, so the power plug can squeeze through.
The AP mesh itself slides into the top part and is friction fit. The POE adapter fits inside the box. I attached it to the wall using a double sided tape, as I didn't want to drill any holes.
No supports are needed with correct orientation (looks like "AC Mesh Outside Box Top.stl" should be flipped 180 degrees, so that the flat part is on the print bed and is standing tall). Hope it works for those who need to mount it…
Cheers!