1 / 2
Foldable RC Shock Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Foldable RC Shock Stand designed for 1/10th. Designed around 13mm shocks but tested with 12mm and they are fine (assuming you have the spring collars fitted!) older small bore shocks probably wont fit.
Requires 4x M3 Cap Head Bolts, max 12mm but 8-12mm will be fine. Needs to be caphead as the bolts act as the hinge. The hinge is nice and solid from my testing.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1S
No
Supports:
No
0.2
Infill:
20
Notes:
PLA will be fine unless you are planning on using in direct sunlight, probably best to use PETG.
Category: R/C Vehicles