Side Mount Flag Pole Holder - 1"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flag Pole Holder that can be mounted parallel to the flag pole direction
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
To avoid damaging the cedar shingles on my home with a face mount bracket, I needed a way to mount my flag pole parallel to my porch post. I found a couple designs by @Dyrt_558258 and @JensJensen_449115 that fit the design needs and space constraints, but could only accommodate a ¾" diameter flag pole.
My new 3' x 5' flag came with a 1" pole, so I used the designs as inspiration and created a new mount that would accommodate the larger diameter pole. I live in a very wet environment, so I also modified the drain holes to be at the lowest point when mounted at a 45 degree angle so water did not build up in the base.
Mounted to post with 4 - #10 x 1 ½" Black Pan Head screw
Print Settings
- Layer Height/Quality: 020" Speed
- Material: PETG (did not test additional materials, but all should work)
- Infill: 20% Gyroid (any infill pattern should work)
- Top/Bottom Layers: 5
- Perimeters: 3
Printed on Prusa MK4