1 / 1
O-ring Installation Bullet for Scubapro G250 Barrel — zdjęcie 1

O-ring Installation Bullet for Scubapro G250 Barrel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just a helpful jig that makes it easier to put on the O-Ring onto the barrel on the threaded side.

Ocena
0 / 5
Polubienia
5
Pobrania
20
Wydruki
0
Wyświetlenia
151
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Just a helpful jig that makes it easier to put on the O-Ring onto the barrel on the threaded side.

Simply cap the bullet on the barrel and slide the o-ring down into the groove.

The tool eliminates the need to stretch the o-ring over the threads of the part, preventing potential damage.

  • Print in the orientation provided.
  • Since the first layer is rather small it requires good bed adhesion.
  • Use 0.20mm or 0.10mm layer height.
  • I've had perfect results with PETG, 2 min perimeters, 3 bottom and 4 top layers.

 

 

Tagi