1 / 1
O-ring Installation Bullet for Scubapro G250 Barrel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a helpful jig that makes it easier to put on the O-Ring onto the barrel on the threaded side.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a helpful jig that makes it easier to put on the O-Ring onto the barrel on the threaded side.
Simply cap the bullet on the barrel and slide the o-ring down into the groove.
The tool eliminates the need to stretch the o-ring over the threads of the part, preventing potential damage.
- Print in the orientation provided.
- Since the first layer is rather small it requires good bed adhesion.
- Use 0.20mm or 0.10mm layer height.
- I've had perfect results with PETG, 2 min perimeters, 3 bottom and 4 top layers.