SubZero Refrigerator Shelf support part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this for my Subzero refrigerator after one of the shelf supports broke and Subzero no longer carries this part.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a large Subzero fridge and freezer. One day a shelf support in the freezer compartment broke. I contact Subzero and they no longer make this part so subsequently the small tiny plastic part is priced at $585 because you have to purchase an entire shelf that comes with the shelf support. I spent 20 minutes designing the part and maybe 2 hours printing and adjusting it until it was a 1:1 fit with the original part and still utilized the original shelf support screw without cracking the model or stressing it.
I printed mine in Nylon because I am utilizing it in my freezer. If you are using it in your fridge (uses the same part), then PETG or PLA+ would be sufficient.
4-6 walls, solid infill/100%. no supports needed.
I have been using this in my freezer for over a year with no issues. I simply hope this helps someone!