SubZero Refrigerator Shelf support part
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this for my Subzero refrigerator after one of the shelf supports broke and Subzero no longer carries this part.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a large Subzero fridge and freezer. One day a shelf support in the freezer compartment broke. I contact Subzero and they no longer make this part so subsequently the small tiny plastic part is priced at $585 because you have to purchase an entire shelf that comes with the shelf support. I spent 20 minutes designing the part and maybe 2 hours printing and adjusting it until it was a 1:1 fit with the original part and still utilized the original shelf support screw without cracking the model or stressing it.
I printed mine in Nylon because I am utilizing it in my freezer. If you are using it in your fridge (uses the same part), then PETG or PLA+ would be sufficient.
4-6 walls, solid infill/100%. no supports needed.
I have been using this in my freezer for over a year with no issues. I simply hope this helps someone!