1 / 3
Pocket Powerbox Advance Gen2 - MeLe Quieter and Overclock 4C Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to mount the 4C on top of the PPBA.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 1126
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 5)Remiksy (0)Kolekcje (20)Powiązane
Thanks to reddit user hclrke for providing his design so I could fine tune the hole spacing and vertical supports.
Used M3 socket cap screws of suitable length to mount the plate to the Mele as well as to mount this assemble to PPBAV2.
I did not have to use any supports in the print