Victory High Ball Hueforge

Please make sure you pick the right stl. There are 2 versions of this model 0,04mm and 0,08mm

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
PLA PolyLite Pro Black Transmission Distance: 0.3
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Steel Grey Transmission Distance: 1
PLA PolyLite Pro White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #24 (1.08mm) swap to Charcoal Black
At layer #29 (1.28mm) swap to Steel Grey
At layer #37 (1.6mm) swap to White for the rest.

If you get the message with the floating regions when slicing... you can ignore this

If you want to resize, scale only x and y. Z must stay as it is

I also have done a 0,08mm version. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
PLA PolyLite Pro Black Transmission Distance: 0.3
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Steel Grey Transmission Distance: 1
PLA PolyLite Pro White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Charcoal Black
At layer #15 (1.28mm) swap to Steel Grey
At layer #19 (1.6mm) swap to White for the rest.

If you get the message with the floating regions when slicing... you can ignore this

If you want to resize, scale only x and y. Z must stay as it is