Mount or Cover for optic sensor Omron TL-W5MB1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cover or mount for a worn optic sensor like the Omron TL-W5MB1.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This is a cover or mount for the optic Sensor Omron TL-W5MB1. Is used in some heavy idraulic press and the cutting oil used on that machine literally worn the plastic component of the sensors destroying or making brittle the plastic where the screw are used so the sensor was loose (or with both of the hole for the screws destroyed) and cannot be used. So I designed this piece for holding in place the sensor and reinforce where the screws are used.
If your machine is using a cutting oil, please print this thing with a oil-resistant filament like TPU or PETG.