1 / 1
Team Xray XB8 and XB8e rear wing spacer — zdjęcie 1

Team Xray XB8 and XB8e rear wing spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Team Xray XB8 and XB8e rear wing spacer, used to mount the rear wing 10 mm higher.

Ocena
0 / 5
Polubienia
1
Pobrania
37
Wydruki
0
Wyświetlenia
198
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

In certain conditions the car will be smoother and easier to jump with the rear wing mounted higher.

You need to use a longer bolt then the standard to mount the rear wing through the spacer (simply add 10mm).

These spacers are a tight fit.

(Been running these for more then a year (mine in PETG). Never failed on me.)

Another trick: remove the bolts, used to mount the rear wing from the rear-wing-brackets and drill through the brackets with a 2.5 drill. Then replace the bolts again.
This way, you can keep using the longer bolts when not using these spacers AND it provides less chance of losing rear wing due to the bolts vibrating loose.

 

PRINTING: any filament will do.
Unfortunatly can not be printed without supports.

Tagi