Common components for the Bumbag customizable electronics enclosure system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collection of utility placeable components for the Bumbag customizable electronics enclosure system.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A collection of common utility placeable components for the Bumbag Customizable Enclosure System including cable management, mounting posts, screw-from-underneath cutouts, vents and fans.
cut_under_m3cs
Creates a countersunk cut-out for an M3 countersunk screw inserted from under the base of the enclosure. The screw will protrude by approximately L - 2.7mm (where L is the length of the screw).
cut_under_m4cs
Creates a countersunk cut-out for an M4 countersunk screw inserted from under the base of the enclosure. The screw will protrude by approximately L - 4mm (where L is the length of the screw).
Attribution
The following files are remixed from RatRig printable parts and/or published CAD models:
- ratrig_cable_guide_4.stl
- ratrig_cable_guide_cross.stl
- ratrig_cable_tray_5.stl
The files in the psu directory incorporate 3D models published by Meanwell.