Common components for the Bumbag customizable electronics enclosure system
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A collection of utility placeable components for the Bumbag customizable electronics enclosure system.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 57
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A collection of common utility placeable components for the Bumbag Customizable Enclosure System including cable management, mounting posts, screw-from-underneath cutouts, vents and fans.
cut_under_m3cs
Creates a countersunk cut-out for an M3 countersunk screw inserted from under the base of the enclosure. The screw will protrude by approximately L - 2.7mm (where L is the length of the screw).
cut_under_m4cs
Creates a countersunk cut-out for an M4 countersunk screw inserted from under the base of the enclosure. The screw will protrude by approximately L - 4mm (where L is the length of the screw).
Attribution
The following files are remixed from RatRig printable parts and/or published CAD models:
- ratrig_cable_guide_4.stl
- ratrig_cable_guide_cross.stl
- ratrig_cable_tray_5.stl
The files in the psu directory incorporate 3D models published by Meanwell.