1 / 2
15W Magsafe phone and watch stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to print well and fit Pro Max phone vertically.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 340
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Prints cleanly with no supports.
Photos shown were printed on a Prusa Mini using the 0.2 mm Speed profile.
Compatibility Notes
MagSafe Charger:
- Designed specifically for the 15W MagSafe puck.
- The newer 25W MagSafe has a smaller radius and is thinner, so it will not fit.
Apple Watch Charger:
- Older watch charging pucks (e.g., the one included with Apple Watch Series 5) are about 2 mm thicker, so they will sit slightly proud, as shown in the photos.
- Newer pucks (e.g., from Apple Watch Series 8) fit flush, which this model is tuned for.
- The Apple Watch Series 10 puck is roughly 1 mm thinner, but still works well — the tight friction fit keeps it securely in place.