1 / 2
GONG Hydrofoil Mast Base Shim 0.5 degree
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows adjusting the board to mast base trim on a hydrofoil board by 1/2 degree nose up or down.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 440
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
Gcode for MK4 in PETG Hatchbox. Manual layer change to produce the bi color lettering. Design is near a match for the V3 GONG high modulus carbon mast, with slight adjustments to make it symmetric to use for either nose up or nose down trim.
Note the print gcode file includes the pause for a manual filament change to accomplish the color change.