1 / 3
HXT connector housing for use with 4mm bullet connectors — zdjęcie 1
1 / 3

HXT connector housing for use with 4mm bullet connectors

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A housing for the HXT 4mm connectors, allowing the use of standard 4mm bullet connectors with existing HXT RC devices

Ocena
0 / 5
Polubienia
3
Pobrania
24
Wydruki
0
Wyświetlenia
167
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

You may need to clean out any stringing on the inside, bullet connectors should snap into place slightly. If the connector won't go in, heating it up and gently pressing with a soldering iron can work to soften the plastic. I used hot glue to ensure the cables stay in place reliably. 

I used these bullet connectors with this model, any similar ones should work https://www.amazon.com/dp/B07CSQH2QC

Thanks to Szekely Janos, the creator of the source model on gradcab. 

 

Tagi