Belt Deflect-O-Meter Plunger Handle Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a push-type handle-additional mod for the Taffert Designs Belt Deflect O Meter.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a push-type handle-additional mod for the Taffert Designs Belt Deflecto Meter.
Based on the open design of mo_ks.
You can measure the belt more comfortably with one hand.
https://www.thingiverse.com/thing:6600277
The design and assembly method of mo_ks are almost the same. Just put the plunger in at the very end and you're done.
Use a small tip that can be pulled as far as possible so that there is no interference in the holes in the tire gauge
The explanation may be strange due to the use of a translator.🥲