6mm scale Round Skyscraper - Viceroy Tower - BattleTech Compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A skyscraper made of stackable levels. Original work designed to be compatible with BattleTech and other 6mm games.
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 517
- Wydruki
- 1
- Wyświetlenia
- 1289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings.
My own original work designed to be compatible with BattleTech ("BT") and other 6mm Games. In BattleTech map scale, this is 7 hex building that is sectioned so you can stack it from 3 levels to however high you want to go. Make honking huge skyscrapers!
Provided are
- ViceroyTowerGroundLevelBlock.stl: Ground Level block (2 BT levels)
- ViceroyTowerOneLevelBlock.stl: One BT level block for intermediate levels
- ViceroyTowerTwoLevelBlock.stl - Two BT level block for intermediate levels
- ViceroyTowerTopBlock.stl: One BT level top floor with VTOL landing pad
- ViceroyTower8Levels - 8 Levels, all in one. I have NOT printed this, it's here mainly to give you a completed view of all components together, including using two two level blocks. No reason it shouldn't print if your printer is large enough though.
This is a Work in Progress, but I successfully have printed this on a mini+.
For all of my buildings, I recommend 1.2mm wall thickness. I design them to be “acceptable” at .2mm layer height for FDM printers.
No supports needed if you've got your settings dialed in, but I always use a brim. In fact, supports are likely to ruin the window detail.